MD-Quad - 4x SDI zu SDI und HDMI Zur Vergrößerung fahren Sie mit der Mouse über das Bild,
oder zoomen Sie das Bild durch Anklicken.

MD-Quad - 4x SDI zu SDI und HDMI

von: Decimator (Redbyte) Design

Bestell-Nr.: RB-MDQUAD

incl. Netzteil RBN1

Mehr Quad-Konverter braucht man nicht!

Ware wird, bzw. ist nachbestellt

€ 1.150,00

obige Preisangaben sind Netto-Preise, zuzüglich gesetzlicher Umsatzsteuer und gegebenenfalls
zuzüglich Versandkosten (netto)*

Produktinformationen "MD-Quad - 4x SDI zu SDI und HDMI"

FunktionMultiView Processor
I/Os Audio
I/Os VideoHDMI
I/Os Video3G
I/Os Optical
I/Os Remote

Decimator (Redbyte) Design - MD-QUAD

MINIATURE (3G/HD/SD)-SDI Quad Split with (3G/HD/SD)-SDI and HDMI Outputs


(Excluding units with serials starting with MQS):


  • Professional 3G/HD/SD Test Pattern Generator featuring:

  - 26 Selectable Output Formats
  - 54 Test Patterns including Luma and Chroma Zone-plates

  • Audio Tone Generator
  • In Quad-Split mode the first 8-channels of audio from any input can now be passed to both the HDMI and SDI output
  • On-screen audio id pop-up when selection audio source in Quad-Split mode
  • On-screen display pop-up when using the rotary to allow for use when without a PC


  • Low cost miniature (3G/HD/SD)-SDI 4 to 1 Quad Split or 4 to 1 input multiplexer
  • Selectable output format in Quad-Split mode
  • Low latency buffering for each input allowing non-synchronous inputs
  • Linked (3G/HD/SD)-SDI and HDMI outputs
  • 4 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)
  • 8-Channel Audio metering for each quadrant with:
              - The first two audio groups individually selectable
              - Vertical or Horizontal Bars
              - AES/EBU, VU, Extended VU, BBC, EBU, DIN and NORDIC Scales
              - Bar & Float, Bar only or Float only (Float is not available for MQS serials)
              - Transparency adjustment
              - Separate Bar and Float Ballistics control
              - Adjustable Reference level
              - Red, Yellow and Green Range adjustment
              - Bar thickness adjustment
              - Margin adjustment
  • Each quadrant is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
  • Variable aspect ratios per quadrant
  • All 4 inputs can be displayed simultaneously on a single output
  • Pass-Through mode allowing any of the 4 inputs to be selected for output
  • In Pass-Through mode the selected input is passed through to both the (3G/HD/SD)-SDI and HDMI outputs
  • On-Screen 16 character IDs (UMDs) for each input
  • A single tallies for each input is available from the GPI
  • An extensive selection of user controllable functions via an easy to use rotary encoder for menu selection. LEDs and a push button can then be used for status and control
  • USB port for control and updates
  • GPI on RJ-45 for remote switching
  • Locking DC Power Socket
  • The following is included with the unit: Power Supply, HDMI Cable, USB Cable and Mounting Bracket


VIDEO FORMATS 3G:SMPTE 424M@2.97 and 2.967Gb/s
• 1080p@60/59.94/50Hz
HD:SMPTE 292M/274M/296M@1.485 and 1.435Gb/s
• 1080i@60/59.94/50Hz
• 1080p/psf@30/29.97/25/24/23.98Hz
• 720p@60/59.94/50/30/29.97/25/24/23.98Hz
SD:SMPTE 259M@270Mb/s
• 625i50
• 525i59.94
INPUTS • Input Equalization > 100M using Belden 1694A
• USB for control and updates
• GPI on RJ-45
OUTPUTS • 1 x 10-bit (3G/HD/SD)-SDI Re-clocked
MENU OPTIONS • Input status for all 4 inputs
• Output format
• Output selection of Quad Split or input 1, 2, 3 or 4.
• Output aspect and type of 16:9 or 4:3 at either 90 or 100% of screen size
• Individual aspect format for each input of Same as output, Letter-box or Pillar-box
• Border Enable
• Quad split mode reference of either Free-run or input 1
• Enables for On-Screen Overlays
• Basic Audio Meter control
• 4x Signal Lock and rate
POWER • +5V to +24V DC, 6 Watts
• Positive Centre Pin
DIMENSIONS 90mm x 94mm x 23mm

Weitere Informationen zu "MD-Quad - 4x SDI zu SDI und HDMI"

Weitere Informationen zu Decimator (Redbyte) Design

Hierzu passende Artikel:

Power Adapter Dtap

Power Adapter Dtap

ab € 75,55*

Power Adapter Dtap to DC locking power connector

Power Adapter XLR-M

Power Adapter XLR-M

ab € 78,00*

Power Adapter XLR-4M to DC locking power connector, 40 cm

Netzteil RB N1

Netzteil RB N1

ab € 35,00*

Power Supply universal input 100/240 V AC 50/60 Hz, 1x DC Out 12V 5 W

Kundenbewertungen für "MD-Quad - 4x SDI zu SDI und HDMI"

Schreiben Sie eine Bewertung

Bewertung zu diesem Artikel schreiben

Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.